• Powder-coated aluminium extrusion body with pressure die-cast end caps
• Virtually indestructible polycarbonate lens
• Hard-coated, durable polycarbonate protective cover
• 40 OSRAM™ LEDs with 50,000+ hour lifespan
• 24 Hyperspot® and 16 high-output flood optic LEDS
• 926m @ 1 Lux which is a 53% increase VS AR40C V1 combo light bar
• Gore® breather
• Vibration tested to MIL810-STDG
• RoHS compliant
• Dust and waterproof to IP68 rating
• Submersible to three metres
• Over and under voltage protection
• Integrated active thermal management
• Protected against radio frequency (RFI) and electromagnetic (EMC) interference
• Deutsch DTP waterproof connector also rated to IP68 specifications
• Note: all current mounts fit both V1 or V2 Light Bars, which are sold seperately

ARB’s iconic Light Bar has been reborn, incorporating the latest optic and LED technology, with subtle styling updates, the ARB Intensity Light Bar V2 (Version 2) has pushed the limits of driving light technology once again.The new release of the Intensity V2 Light Bar uses the same optimal chassis design of the current Intensity light, yet incoporates the latest in LED technology using OSRAM GIANTS and advanced optics via the latest Hyperspot™ technology in our combo configuration, a further refined design for our flood confgurations to extend the floods ability to drive light further down the road, as well as spreading the light in front of the vehicle. This can only be achieved by dedicated flood and spot opitcs combined into one light bar.Hyperspot™:Hyperspot™ is a refined optic used to focus and intensify the light output and drive the LED OSRAM GIANTS at amazing distances down the road, whilst keeping clarity in the beam and controlling the beam pattern to the correct area on the road, without spilling light into areas not required or fore filled by the flood configuration. Pumping a heap of power into a light and getting great distances down the road is all well and good, but if the light is not controlled and focused to the areas required for the natural eyeto see, then the power is ultimately wasted. It goes to show that it’s not

Technical Specifications - AR40CV2

• High output OSRAM® LED’s
• 25,080 raw Lumens for the AR40CV2 combo
• 9-36 volts operating (lights and loom ok for 24V vehicles)•305 watts of power•21A @ 14.4V (requires new V2 looms, see table below)
• 6 degree spread for spot LEDs, and 20 degree spread for flood LEDs
• Input cable length – 400mm (15.74”)•
• Operating temp -40°C to 63°C (-40°F to +145°F)
• Tested to exceed 90°C•5700K Color Temp
• 4.05Kg (8.9lb)
• Dimensions - 560mm (22.1”) x 91mm (3.6”) x 125mm (4.9”)
• 3 year warranty
• Fitting Time starting from – 1.75hrs (standard setup) allow additional time for custom work
• 1x AR40CV2 Light Bar includes
        - 1 x Combo AR40 V2 Light Bar V2
         - 1 x Clear Cover